Readers ask: How To Reset Elec Cctv Password Troubleshooting?


How do I reset my DVR to factory settings?

To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the DVR’s power supply back into the unit, you will hear a beep.

How do I reset my HIK DVR password?

  1. On device. 1) Click Forget Password on login menu. 2) Choose Verify by Hik -Connect. 3) Into the following page:
  2. On app. 1) Run Hik -Connect app. 2) Tap More – Reset Device Password.
  3. On device. 1) Enter the verification code obtained from app in the box below. 2) Click OK, then the system allows to create new password.

How can I change my CCTV CP Plus password?

Step 1 Select Main Menu > Account > Reset Password. The Reset Password interface is displayed.

How can I reset my hikvision DVR password without Internet?

Connect the device to local network and run SADP software to search online devices. Once it has been discovered, select the device and click “Forget Password ”. It will pop-up a dialog, you need to enter security code to restore default password. After input security code, hit “confirm” to restore password.

You might be interested:  Quick Answer: How Long Do Small Businesses Keep Cctv Sex In Car?

How do I reset my IP camera without reset button?

All you need to do is hold down the power button for about 12 seconds when the power is off, and wait for it to reboot before releasing the power button.

What is the default password of DVR?

What are the default passwords for my DVR or NVR? The default passwords for your DVR or NVR are the same as the username.

How do I reset my CCTV password?

Here are the ways you can recover from a lost password.

  1. Use the DVR factory default password.
  2. Use a DVR password generator.
  3. Update the firmware and reset the DVR.
  4. Reset the DVR by removing the battery.
  5. DVR physical reset with jumpers.
  6. Delete the password file by using telnet.

How do I factory reset my CP Plus camera?

How to reset IP Camera to factory defaults

  1. Keep the device powered on for at least 30 seconds to complete its normal startup.
  2. Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults.

What is hikvision default password?

Surveillance Brands – Default Username and Passwords

Brand User Name Password
GVI Admin 1234
HIKVision admin 12345
Honeywell administrator 1234
IOImage admin admin


Where is the reset button on Hikvision camera?

In a Hikvision camera, usually the reset button is located close to the memory card slot. Hikvision camera hard reset

  1. Disconnect the camera power supply;
  2. Press and hold the reset button;
  3. Connect the camera power supply;
  4. Keep holding the reset button for 15 seconds;
  5. Release the reset button.
You might be interested:  Often asked: What Is The Best Cctv Cable?

What is Hikvision IP camera default password?

2: Input the “Username” ( default: admin ), “ Password ” ( default: 12345) and “Port” ( default: 8000) of the camera, and then click [Login].

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post